Aloha Bay Himalayan Salt Lamps Cube 4 inch
SKU
015579
MSRP $49.00
UPC: 760860841600
FRONT PANEL: ALOHA SALT LAMP CUBE 4 INCH Salt Crystal Cube Lamp
SUPPLEMENT FACTS: SEE INSTRUCTIONS.
INGREDIENTS: One cube salt lamp w/bulb.
DIRECTIONS: IMPORTANT: Please Read Instructions PLEASE READ CAREFULLY Salt crystals absorb moisture from the air, especially in cold and damp rooms. To avoid sweating of the salt lamp, and possible salt water damage: 1) Only use your Himalayan Salt Lamp in heat- regulated, dry areas. 2)When you install your salt lamp, always put it on a water tight plate first, And then check, after a day or so, if it stays dry to the touch when turned off. If not, it is recommended to move the lamp to a drier location. You can dry a moist salt lamp by simply switching it on for a few hours. 3)Always place your salt lamp away from children and pets. To change the 15W light bulb: pull the power plug from its source, then remove the electrical fitting from the lamp by carefully pulling on the cord until the two springs pop out of the lamp. CAUTION: Do not pull on the fitting or metal plate itself, as the springs may hurt your fingers. After changing the bulb, gently press the springs together and insert the fitting back into the lamp.
UPC: 760860841600
FRONT PANEL: ALOHA SALT LAMP CUBE 4 INCH Salt Crystal Cube Lamp
SUPPLEMENT FACTS: SEE INSTRUCTIONS.
INGREDIENTS: One cube salt lamp w/bulb.
DIRECTIONS: IMPORTANT: Please Read Instructions PLEASE READ CAREFULLY Salt crystals absorb moisture from the air, especially in cold and damp rooms. To avoid sweating of the salt lamp, and possible salt water damage: 1) Only use your Himalayan Salt Lamp in heat- regulated, dry areas. 2)When you install your salt lamp, always put it on a water tight plate first, And then check, after a day or so, if it stays dry to the touch when turned off. If not, it is recommended to move the lamp to a drier location. You can dry a moist salt lamp by simply switching it on for a few hours. 3)Always place your salt lamp away from children and pets. To change the 15W light bulb: pull the power plug from its source, then remove the electrical fitting from the lamp by carefully pulling on the cord until the two springs pop out of the lamp. CAUTION: Do not pull on the fitting or metal plate itself, as the springs may hurt your fingers. After changing the bulb, gently press the springs together and insert the fitting back into the lamp.
Validate your login